RockSeal 6600 P
ROCKSEAL 6600P is a two component Polysulphide sealant. It is used for sealing construction and expansion joint sealant where large movement is anticipated in concrete construction and for joints between diverse construction materials like glass, aluminum, steel, cladding, glazing, tiling, tanks, internal and water retaining structures. It is used for sealing of constructions and expansion joints where there is vehicular traffic (e.g. airports and bridges) or pedestrian traffic. After mixing Resin and Hardener, the polymerization is initiated at room temperature, which proceed further until it is cured. It has superior joint movement accommodation with strong adhesion to most building material. It is chemically resistance to water oils solvents
Specification Compiles
- IS 12118 : Bureau of Indian Standard Specification
- MAF : IRC 57
- Cures at ambient temperatures to a tough, elastic and flexible rubber like material.
- Bonds strongly to most of the building materials with the use of recommended primers.
- Durable, remains unaffected by UV rays, ozone and weathering conditions.
- Resistant to water, salt water, 10% dil. acids except nitric acids, alkalis, most of the common chemicals, vegetable, lubricating oils and fuels.
- Performs well in a temperature ranging from –20⁰C to 80⁰C.
- Slip resistant (sag) can be applied in horizontal joints.
- Movement capability Provides satisfactory hermetic sealing of the joint subjected to expansion, contraction, vibration and cyclic movement within the following limits. -Movement joints up to +/- 20 % of the width.
- Slip resistant (non-sag) can be applied in vertical & ceiling g joints.
- Self levelling, after pouring in horizontal joint levels itself.
- Resilient. Recovers the original width after expansion & contraction without loosing the surface bond.
- Excellent reparability property.
- It can be over coated by waterproofing compounds.
- Non-toxic.
- Sealant will not cause staining to concrete masonry or stones.
- Sealing of expansion, contraction & construction joints in building structure such as, buildings, roof terraces & ceilings & Sealing of dynamic structural cracks where maximum movement capability is not more than 20%.
- Glazing joints of window, door frame and curtain walls.
- Joints & ‘J’ bolts of asbestos sheet roofing.
- Sealing of water retaining structure joints such as, Water tank, reservoir, aqua ducts.
- Sealing of joints in traffic areas such as industrial floors, and car parking areas.